
The HV9805 driver IC is targeted at general LED lighting products, such as LED lamps and LED lighting fixtures with a maximum power rating of about 25W at 120VAC and about 50W at 230VAC.
A two-stage topology provides true constant current drive for the LED load while drawing mains power with high power factor. The first stage, a boundary conduction mode boost converter, transfers power from the AC line to a second stage with high power factor and high efficiency. The second stage, a linear regulator arranged for operation with low overhead voltage, transfers power from the first stage to the LED load with true constant current and protects the LED load from overvoltage that may pass from mains to the output of the first stage.
The IC is particularly geared to drive a high voltage LED load. An LED load arranged as a high voltage load is capable of offering cost advantages in terms of heat management and optics.????????????????????????????????
The boost converter employs a cascode switch for?high-speed switching and convenient generation of the?VDD supply. The control device of the cascode switch is?an integral part of the HV9805 and is rated at 700 mA.?Current for powering the VDD supply is derived by way?of an internal connection to the cascode switch.??????
Applications with? low output? voltage can be accommodated by the SEPIC topology.???????????????????
Provides True DC Light and protects load from line voltage transients
Driver topology includes:
Boundary Conduction Mode (BCM) Boost Converter with Power Factor Correction
High Power Factor(98%+)
High Efficiency (90%+)
Linear Post-Regulator with Low Overhead Voltage
Zero LED Current/Brightness Ripple
Overvoltage Protection for LEDs
High Efficiency
±4% Reference over Temperature
Simple VDD Supply:
No Auxiliary Winding Required
Boost Converter Cascode Switch:
Internal Switch rated at 700 mA peak
Supports up to 25W at 120VAC
Supports up to 50W at 230VAC
Compatibility with SEPIC Topology for Low Output Voltage Applications
HV9805 封裝圖
型號 | 制造商 | 描述 | 購買 |
---|---|---|---|
HV9805MG-G | MERCURY | 有源晶振 2.5V SMD-6 16.58MHz | 立即購買 |
2015年7月2日,德國慕尼黑訊HV-ModAL研究項目旨在進一步提高電動汽車動力總成的功率。HV-ModAL希望在今后三年內,打造出一個適用于不同制造商生產的各類電動汽車的電力動力總成模塊化系統工具箱。包括英飛凌在內的來自汽車...
富士通半導體推出了用于HV/EV電機控制的32位微控制器MB91580系列,以及用于駕駛輔助顯示控制的系統LSI MB86R11。我們不妨來看看兩款器件到底有哪些具體功能和特點,又在汽車中發揮怎樣
此降壓型拓?fù)浣Y(jié)構電路并沒有與線電壓隔離。 LED 必須在交流電源開啟之前就與驅動器相通連。
LV/HV P-Well BCD技術能夠?qū)崿F(xiàn)低壓 5 V 與高壓 100~700 V(或更高)兼容的 BCD 工藝。為了便于高低壓 MOS 器件兼容集成,采用源區為硼磷雙擴散形成溝道的具有漂移區的偏置柵結構的 HV LDMOS 器件。改變漂移區的長度,寬度,結深度以...
“HV”系列連接器及線束總成是專為汽車應用設計,尤其是基于高電壓及高電流設計的混合動力汽車及純電動汽車;
...一個新的視野,開創了一片新天地。高壓LEDs 模組光源(HV LEDs),它的正向工作電壓VF 相比LVLED 是高壓的,可以人為的在生產時設計控制,HV LEDs 是在同一芯片上的模組,它在生產時已完成PN 結的片上串聯,因此整個模組的VF 比...
本視頻介紹了PIC12F(HV)752和PIC16F(HV)753的器件特性、功能外設、應用實例,以及針對不同照明需求的解決方案。
本文介紹了LT3652HV主要特性, 方框圖以及多種應用電路.LT3652HV是Linear公司的完整的單片降壓電池充電器,工作電壓從4.95V到34V,具
HMC6300 | HMC408 | HMC-C038 | HMC1055 |
HMC365G8 | HMC263-Die | HMC365-Die | HMC347 |
HMC7911 | HMC311LP3 | HMC241ALP3E | HMC1040 |
HMC1169 | HMC441LH5 | HMC370 | HCPL0611 |
HMC-C079 | HMC591LP5 | HMC1019A | HMC637A-Die |