ADM489A

購買收藏

5 V, Slew-Rate Limited, Low Power, 250 kbps, Full Duplex EIA RS-485 Transceiver (with DE/RE)

制造商：ADI/AD

中文數據手冊

ADM489Adatasheet.pdf

產品信息

優勢和特點

Complies with ANSI TIA/EIA-485-A-1998 and ISO 8482: 1987(E)

250 kbps data rate

Single 5 V ± 10% supply

?7 V to +12 V bus common-mode range

Connect up to 32 nodes on the bus

Reduced slew rate for low EM interference

Short-circuit protection

30 μA supply current

產品詳情

The ADM488A and ADM489A are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both RS-485 and RS-422 standards of the Electronics Industries Association (EIA). Both products contain a single differential line driver and a single differential line receiver, making them suitable for full-duplex data transfer. The ADM489A contains an additional receiver and driver enable control.

The input impedance is 12 kΩ, allowing 32 transceivers to be connected on the bus. The ADM488A/ADM489A operate from a single 5 V ± 10% power supply.

Excessive power dissipation that is caused by bus contention or output shorting is prevented by a thermal shutdown circuit. This feature forces the driver output into a high impedance state if, during fault conditions, a significant temperature increase is detected in the internal driver circuitry.The receiver contains a fail-safe feature that results in a logic high output state if the inputs are unconnected (floating).

The ADM488A/ADM489A are fabricated on BiCMOS, an advanced mixed technology process combining low power CMOS with fast switching bipolar technology.

The ADM488A/ADM489A are fully specified over the industrial temperature range and are available in SOIC and MSOP packages.

Applications

Low power RS-485 and RS-422 systems

DTE-DCE interface

Packet switching

Local area networks

Data concentration

Data multiplexers

Integrated services digital network (ISDN)

應用案例更多案例

如何適配OpenHarmony自有音頻框架ADM？
回首 Dayu200 開發板的 ADM(Audio Device Model，音頻設備模型)開發過程，是充滿喜悅、充滿收獲的。ADM 是 HDF(OpenHarmony Driver
2022-05-16
adm2483中文資料_adm2483引腳定義封裝及典型應用電路
　　ADM2483差分總線收發器是一款集成式電氣隔離器件，設計用于平衡、多點總線傳輸線路的雙向數據通信。它符合ANSI EIA/TIA-485-A和ISO 8482:1987（E）標準。該器件采用ADI公司的iCoupler技術，將3通道隔離器、三態差分線路驅動器和差...
2009-10-16
ADM2582E/ADM2587E-完全集成式隔離數據收發器
ADM2582E/ADM2587E-完全集成式隔離數據收發器本文主要簡單介紹RS-485總線標準，以及比較幾種常見的RS-485電路，并重點介紹美國模擬器公司（ADI）最新量產的具備±15 kV ESD
2009-10-16
ADM6305/ADM6306 雙電壓監控器
　　ADM6305/ADM6306 是雙電壓監控器，用來監控DSP和微處理器系統中的兩個電源，并提供一個復位信號。這些器件具有低
2009-10-16
adm2587e中文資料_adm2587e典型應用電路示例
本文提供adm2587e中文資料、數據手冊下載，隔離型RS-485收發器adm2587e應用電路資料下載，adm2587e典型應用電路及電路圖講解。
2009-10-16
adm2587e引腳功能介紹_adm2587e外圍電路分析
ADM2582E/ADM2587E采用isoPower?集成式隔離DC/DC技術，是一款隔離的RS-485/RS-422收發器，可配置成半雙工或全雙工模式，通信速率分別為數據速率：16 Mbps/500kbps，采用20引腳寬體SOIC封裝，管腳兼容，其額定工作溫度范圍為工業溫度范圍...
2009-10-16
adm2483的rxd腳無輸出_adm2483通信
ADM2483是ADI（Analogdevice，inc）公司推出的基于其專利iCoupler磁隔離技術的隔離型RS485收發芯片。內部集成了三通道的數字隔離器、帶三態輸出的差分驅動器和- -個帶三態輸入的RS485差分接收器。
2009-10-16
基于ADM1184的嵌入式系統電源監控模塊設計
嵌入式系統對供電電源要求比較嚴格．通常都需采用獨立的穩壓器件供電。在嵌入式系統硬件設計中，通常在電源模塊的交流輸入端為供電提供過壓保護，但在直流輸出端一般只是采用穩壓器件
2009-10-16

系列產品索引查看所有產品

ADL5534	ADA4304-4	ADUC841	AD8131
ADP2121	ADP7183	AD820	AD7740
AD8009	ADUM4150	AR0130CS	ADC0804LCN
AD8001	ADM6339	ADUC7025	AD5757
AR0140AT	ADA4853-1	AD8494	ADN2917

free性丰满hd毛多多,久久综合给合久久狠狠狠97色69 ,欧美成人乱码一区二区三区,国产美女久久久亚洲综合,7777久久亚洲中文字幕

元器件商品{{ gnNumber + hkNumber }}

ADM489A

中文數據手冊

產品信息

應用案例更多案例

系列產品索引查看所有產品