
The LIS3LV02DL is a three axes digital output linear accelerometer that includes a sensing element and an IC interface able to take the information from the sensing element and to provide the measured acceleration signals to the external world through an I2C/SPI serial interface.
The sensing element, capable of detecting the acceleration, is manufactured using a dedicated process developed by ST to produce inertial sensors and actuators in silicon.
The IC interface instead is manufactured using a CMOS process that allows high level of integration to design a dedicated circuit which is factory trimmed to better match the sensing element characteristics.
The LIS3LV02DL has a user selectable full scale of ±2g, ±6g and it is capable of measuring acceleration over a bandwidth of 640 Hz for all axes. The device bandwidth may be selected accordingly to the application requirements.
The self-test capability allows the user to check the functioning of the device.
The device may be also configured to generate an inertial wake-up/free-fall interrupt signal when a programmable acceleration threshold is crossed at least in one of the three axes.
The LIS3LV02DL is available in plastic SMD package and it is specified over a temperature range extending from -40°C to +85°C.
The LIS3LV02DL belongs to a family of products suitable for a variety of applications:
該LIS3LV02DL為一三軸數字輸出線性加速度計,其中包括一個傳感元件和一個集成電路接口能夠從傳感元件的信息和通過I2C/SPI串行接口,外部世界提供實測加速度信號。
的傳感元件,能夠檢測的加速度,使用一個專門的過程開發的由圣生產的慣性傳感器和致動器在硅中使用。
IC接口而不是使用CMOS工藝,使高集成度設計一個專門的電路,工廠調整以更好地匹配傳感元件特性制造。
該LIS3LV02DL有一個全面的用戶選擇±2G,±6g,它能夠測量加速度超過所有軸的帶寬為640 Hz。該設備的帶寬可根據應用要求選擇。
自檢功能允許用戶檢查設備的功能。
該裝置還可配置以產生一個慣性喚醒/自由下落中斷信號,當可編程的加速度閾值交叉至少在三個軸之一。
該LIS3LV02DL可在塑料SMD封裝,它是指定在擴展溫度范圍40°C + 85°C.
該LIS3LV02DL的屬于一個系列的產品適合用于各種應用:便攜式terminalsantitheft系統和慣性navigationgaming和虛擬現實輸入devicesvibration監測和補償自由落體detectionmotion激活功能
2.16V to 3.6V single supply operation
1.8V compatible IOs
I2C/SPI digital output interfaces
Programmable 12 or 16 bit data representation
Interrupt activated by motion
Programmable interrupt threshold
Programmable 12 or 16 bit data representation
Embedded self test
High shock survivability
ECOPACK? compliant (see Section 9)
主要特點
2.16v至3.6V單電源供電
1.8V兼容iOS
I2C或SPI數字輸出接口
可編程12或16位數據表示
動作中斷
可編程中斷閾值
可編程12或16位數據表示
嵌入式自測試
高沖擊生存能力
?符合ECOPACK(見9節)
LIS3LV02DL電路圖
LIS3LV02DL 引腳圖
LIS3LV02DL 封裝圖
本文將介紹如何驅動和利用LIS2DUX12傳感器,實現精確的運動感應功能。 LIS2DUX12是一款數字式智能3軸線性加速度計,其MEMS和ASIC旨在將盡可能低的電流消耗與豐富的特性(如常
本方案是以Infineon TVII-C系列中的CYT3DL為主控,使用TVII-C特有的的Graphic driver,具有2D和2.5D的圖像生成,實現圖像渲染、矢量變換;能夠用單MCU實現數字
Texas Instruments SN74LV4T02-EP四通道二輸入或非門包含四個獨立的雙輸入或非門,具有擴展電壓操作,允許電平轉換。每個邏輯門以正邏輯執行布爾函數Y = A + B。輸出電平支持1.2V、1.8V、2.5V、3.3V和5V CMOS電平,并以電源電壓(V ~CC~ )為基準。
MTA25N02J3替換型號DD016NG,P TO P兼容MTA25N02J3,應用于電機驅動
本文將介紹如何使用 LIS2MDL 傳感器來讀取數據來轉化為指南針。
本文將介紹如何驅動和利用LIS2DW12傳感器,實現精確的運動感應功能。
...DLO液體密度傳感器精確測量鹽水的濃度。 #01 測試對象 #02 測試內容 使用DLO-M1液體密度傳感器來測量密度。 上述不同濃度的液體以恒定流速通過傳感器一段時間。傳感器的記錄功能,會每秒記錄一次密度和溫度的測量值。 #03 HK-t...
...加速度信號無線采集裝置,就是采用了MEMS三軸加速度計LIS3LV02DQ、無線收發芯片nRF2401、8位微控制器μPD78F0547等主要器件而設計的。
LMP90078 | LPS22HB | LAN89530 | LC75890W |
LV8549MC | LC75833E | LM6211 | LSM303C |
LC786821E | L7805 | LMV821 | LM5176 |
LSM9DS0 | LB1960MC | LMH2121 | LC87F17C8A |
LMH6881 | l298 | LMH6702 | LND01 |