The MIC5060 MOSFET driver is designed for gate control of N-Channel, enhancement-mode, and power MOSFETs used as high-side or low-side switches. The MIC5060 can sustain an on-state output indefinitely.

The MIC5060 operates from a 2.75V to 30V supply. In high-side configurations, the driver can control MOSFETs that switch loads of up to 30V. In low-side configurations, with separate supplies, the maximum switched voltage is limited only by the MOSFET.

The MIC5060 has a non-inverting, TTL-compatible control input. The MIC5060 features an internal charge pump that can sustain a gate voltage greater than the available supply voltage. The driver is capable of turning on a logic-level MOSFET from a 2.75V supply or a standard MOSFET from a 5V supply. The gate-to-source output voltage is internally limited to approximately 15V.

The MIC5060 is protected against automotive load dump, reversed battery, and inductive load spikes of -20V. The driver's overvoltage shutdown feature turns off the external MOSFET at approximately 35V to protect the load against power supply excursions. The MIC5060 is available in a 3mm x 3mm MLF? package.

  +2.75V to +30V operation

  100μA maximum supply current (5V supply)

  15μA typical off-state current

  Internal charge pump

  TTL-compatible input

  Withstands 60V transient (load dump)

  Reverse battery protected to a€“20V

  Inductive spike protected to a€“20V

  Overvoltage shutdown at 35V

  Internal 15V gate protection

  Minimum external parts

  Operates in high-side or low-side configurations

  1μA control input pull-off

  Available in 8-pin 3mm x 3mm MLF? package