The AIS1200PS is a peripheral acceleration sensor with a single-axis sensing element and an IC interface able to provide acceleration information to a master control unit through a Manchester-coded protocol (125 kbps).

The sensing element, capable of detecting the acceleration, is manufactured using a dedicated process developed by ST to produce inertial sensors and actuators in silicon.

The IC interface is manufactured using a BCD process that allows a high level of integration. The device is factory trimmed to better tune the sensing element characteristics with the acceleration information to be supplied.

The AIS1200PS has a full scale of ±200 g. The acquisition chain is made up of a C/V converter, a full-differential charge amplifier, a 2nd order LPF with a cutoff frequency of 175 Hz, and a second charge amplifier to adapt the dynamic range to an SAR A/D converter.

The differential capacitance of the sensor is proportional to the proof mass displacement; thus, by sensing the differential capacitance, the position of the sensor is determined. Then, since the mass position is known and the position is related to the input acceleration, the input acceleration can be easily deduced.

The device is available in a plastic SOIC package with 150 mils reverse frame forming for EMC enhancement and is specified over a temperature range extending from -40 °C to +125 °C.

該傳感器是與周邊ais1200ps單軸加速度傳感元件和IC的接口能夠提供加速度信息到主控制單元通過曼徹斯特編碼協議（125 kbps的）。

傳感功能的加速度檢測元件），是一種專用的制造過程由ST使用產生的慣性傳感器和致動器中的硅。

該接口是基于BCD工藝制造，允許高層次的集成。該設備是最好調整到廠trimmed加速度傳感元件的特點是提供的信息。

蛛網膜下腔出血（SAH）全量表的ais1200ps±200鏈上。從采集的研究是用C／V轉換的全差分電荷放大器、二階低通濾波器，具有截止頻率175赫茲，與第二電荷放大器的動態范圍，以適應到一個合成孔徑雷達（SAR）的A / D轉換器。

該傳感器是成比例的差容式軌道位移的差異；因此，通過測量的容，是確定位置的傳感器。然后，由于軌道位置是已知的與位置相關的是輸入的輸入加速度，加速度可以很容易地有。

該器件可用在塑膠SOIC封裝與電磁兼容的反向幀形成150密耳的增強是在指定的溫度范圍內延伸到+125°C - 40°C。

Key Features

• 5 V to 16 V single supply operation

• 10-bit data output

• Embedded voltage regulator

• Embedded self-test

• Asynchronous 2 wire connectivity

• PSI5-A10P v1.3 compliant

• Error detection: single bit even parity

• Automotive AEC-Q100 qualified

• ECOPACK^?compliant

• Extended temperature range: -40 °C to +125 °C

主要特點

5伏至16伏單電源供電

10位數據輸出

嵌入式電壓調節器

嵌入式自測試

異步2線連接

psi5-a10p V1.3標準

錯誤檢測：單比特奇偶校驗

汽車AEC-Q100認證

?符合ECOPACK

擴展溫度范圍：- 40°C至125°C