尊敬的客戶:為給您持續提供一對一優質服務,即日起,元器件訂單實付商品金額<300元時,該筆訂單按2元/SKU加收服務費,感謝您的關注與支持!
ADS7959
8 位、1MSPS、8 通道、單端、微功耗、串行接口、SAR ADC
制造商:TI
產品信息
描述 The ADS79xx is a 12/10/8-bit multichannel analog-to-digital converter family. The following table shows all twelve devices from this product family. The devices include a capacitor based SAR A/D converter with inherent sample and hold. The devices accept a wide analog supply range from 2.7 V to 5.25 V. Very low power consumption makes these devices suitable for battery-powered and isolated power supply applications. A wide 1.7-V to 5.25-V I/O supply range facilitates a glue-less interface with the most commonly used CMOS digital hosts. The serial interface is controlled by CS and SCLK for easy connection with microprocessors and DSP. The input signal is sampled with the falling edge of CS. It uses SCLK for conversion, serial data output, and reading serial data in. The devices allow auto sequencing of preselected channels or manual selection of a channel for the next conversion cycle. There are two software selectable input ranges (0 V to 2.5 V and 0 V to 5 V), four individually configurable GPIOs ( in case of TSSOP package devices), and two programmable alarm thresholds per channel. These features make the devices suitable for most data acquisition applications. The devices offer an attractive power-down feature. This is extremely useful for power saving when the device is operated at lower conversion speeds. The 16/12-channel devices from this family are available in a 38-pin TSSOP and 32 pin VQFN package and the 4/8-channel devices are available in a 30-pin TSSOP and 24 pin VQFN packages.特性1-MHz Sample Rate Serial DevicesProduct Family of 12/10/8-Bit ResolutionZero Latency20-MHz Serial Interface Analog Supply Range: 2.7 to 5.25 V I/O Supply Range: 1.7 to 5.25 VTwo SW Selectable Unipolar, Input Ranges: 0 to 2.5 V and 0 to 5 VAuto and Manual Modes for Channel Selection12, 8, 4-Channel Devices can Share 16 Channel Device Footprint Two Programmable Alarm Levels per ChannelFour Individually Configurable GPIOs for TSSOP package devices. One GPIO for QFN devicesTypical Power Dissipation: 14.5 mW (+VA = 5 V, +VBD = 3V) at 1 MSPSPower-Down Current (1 μA)Input Bandwidth (47 MHz at 3 dB)38-,30-Pin TSSOP and 32-,24-Pin QFN PackagesAPPLICATIONSPLC / IPC Battery Powered SystemsMedical InstrumentationDigital Power SuppliesTouch Screen ControllersHigh-Speed Data Acquisition SystemsHigh-Speed Closed-Loop SystemsAll other trademarks are the property of their respective owners
2018-07-06
2018-07-06
2018-07-06
2017-12-21
以ADS軟件為例,射頻電路設計的科學方法從20世紀80年代開始,射頻微波電路技術的應用方向逐漸由傳統波導同軸器件轉移到微波平面PCB電路方面,微波平面電路設計一直是一項比較復雜的工作?,F(xiàn)在的無線通信產品已經從早期的2G,逐步發展到3G、4G乃至5G。
2019-03-08
ADS生成bin的方法 ADS路徑問題ADS生成bin的方法 Edit DebufRel settings Target Settings Post-Linker ARM fromELF 然后在 ARM FromELF Plain binary 下面的路徑 似乎不用設置,空著就ok,我設了反倒出不來bin。奇怪。還有就是在代碼框,也要設置DebufRel settings一遍,好像分開的。
2018-04-10
2019-02-03
2012-08-22