尊敬的客戶:為給您持續提供一對一優質服務,即日起,元器件訂單實付商品金額<300元時,該筆訂單按2元/SKU加收服務費,感謝您的關注與支持!
ADS7953
具有串行 I/F 的 12 位、1MSPS、16 通道、單端、微功耗 SAR ADC
制造商:TI
產品信息
描述 The ADS79xx is a 12/10/8-bit multichannel analog-to-digital converter family. The following table shows all twelve devices from this product family. The devices include a capacitor based SAR A/D converter with inherent sample and hold. The devices accept a wide analog supply range from 2.7 V to 5.25 V. Very low power consumption makes these devices suitable for battery-powered and isolated power supply applications. A wide 1.7-V to 5.25-V I/O supply range facilitates a glue-less interface with the most commonly used CMOS digital hosts. The serial interface is controlled by CS and SCLK for easy connection with microprocessors and DSP. The input signal is sampled with the falling edge of CS. It uses SCLK for conversion, serial data output, and reading serial data in. The devices allow auto sequencing of preselected channels or manual selection of a channel for the next conversion cycle. There are two software selectable input ranges (0 V to 2.5 V and 0 V to 5 V), four individually configurable GPIOs ( in case of TSSOP package devices), and two programmable alarm thresholds per channel. These features make the devices suitable for most data acquisition applications. The devices offer an attractive power-down feature. This is extremely useful for power saving when the device is operated at lower conversion speeds. The 16/12-channel devices from this family are available in a 38-pin TSSOP and 32 pin VQFN package and the 4/8-channel devices are available in a 30-pin TSSOP and 24 pin VQFN packages.特性1-MHz Sample Rate Serial DevicesProduct Family of 12/10/8-Bit ResolutionZero Latency20-MHz Serial Interface Analog Supply Range: 2.7 to 5.25 V I/O Supply Range: 1.7 to 5.25 VTwo SW Selectable Unipolar, Input Ranges: 0 to 2.5 V and 0 to 5 VAuto and Manual Modes for Channel Selection12, 8, 4-Channel Devices can Share 16 Channel Device Footprint Two Programmable Alarm Levels per ChannelFour Individually Configurable GPIOs for TSSOP package devices. One GPIO for QFN devicesTypical Power Dissipation: 14.5 mW (+VA = 5 V, +VBD = 3V) at 1 MSPSPower-Down Current (1 μA)Input Bandwidth (47 MHz at 3 dB)38-,30-Pin TSSOP and 32-,24-Pin QFN PackagesAPPLICATIONSPLC / IPC Battery Powered SystemsMedical InstrumentationDigital Power SuppliesTouch Screen ControllersHigh-Speed Data Acquisition SystemsHigh-Speed Closed-Loop SystemsAll other trademarks are the property of their respective owners
基于ADS對射頻前端的接收端建模與仿真分析近年來,隨著無線通信業務的迅速發展,通信頻段已經越來越擁擠。1985年美國聯邦通信委員會(FCC)授權普通用戶可以使用902 MHz,2.4 GHz和5.8 GHz三個工業、科技、醫學(ISM)頻段。ISM頻段為無線通信設備提供了無需申請?jiān)诘桶l(fā)射功...
2010-06-04
2023-10-16
2025-08-14
ADS生成bin的方法 ADS路徑問題ADS生成bin的方法 Edit DebufRel settings Target Settings Post-Linker ARM fromELF 然后在 ARM FromELF Plain binary 下面的路徑 似乎不用設置,空著就ok,我設了反倒出不來bin。奇怪。還有就是在代碼框,也要設置DebufRel settings一遍,好像分開的。
2010-06-04
基于ADS的射頻微波元器件模型庫構建講解教程仿真是早期驗證最重要、最直觀的手段,也是研發過程中發現問題和優化設計的重要途徑。本文針對不同類型器件,提出了基于原理圖模型、行為級模型以及 測試模型,建立射頻微波模型庫。其中,使用基于測試結果的X參數能...
2010-06-04
工程師如何使用ADS仿真?如何優化ADS仿真?工程師如何使用ADS仿真?如何優化ADS仿真?我需要詳盡、詳實、細致的最少1500字的文章 摘要: 高級設計系統(ADS)是一種強大的模擬和設計軟件工具,被世界各地的射頻和微波工程師所使用。在這
2023-10-20
2023-07-05
2018-07-06