尊敬的客戶:為給您持續提供一對一優質服務,即日起,元器件訂單實付商品金額<300元時,該筆訂單按2元/SKU加收服務費,感謝您的關注與支持!
THS10082
具有雙通道、并行 DSP/uP 接口、16X FIFO、通道自動掃描、低功耗的 10 位 8MSPS ADC
制造商:TI
產品信息
描述The THS10082 is a CMOS, low-power, 10-bit, 8 MSPS analog-to-digital converter (ADC). The speed, resolution, bandwidth, and single-supply operation are suited for applications in radar, imaging, high-speed acquisition, and communications. A multistage pipelined architecture with output error correction logic provides for no missing codes over the full operating temperature range. Internal control registers allow for programming the ADC into the desired mode. The THS10082 consists of two analog inputs, which are sampled simultaneously. These inputs can be selected individually and configured to single-ended or differential inputs. An integrated 16 word deep FIFO allows the storage of data in order to take the load off of the processor connected to the ADC. Internal reference voltages for the ADC (1.5 V and 3.5 V) are provided. An external reference can also be chosen to suit the dc accuracy and temperature drift requirements of the application. Two different conversion modes can be selected. In the single conversion mode, a single and simultaneous conversion can be initiated by using the single conversion start signal (CONVST). The conversion clock in the single conversion mode is generated internally using a clock oscillator circuit. In the continuous conversion mode, an external clock signal is applied to the CONV_CLK input of the THS10082. The internal clock oscillator is switched off in the continuous conversion mode. The THS10082C is characterized for operation from 0°C to 70°C, and the THS10082I is characterized for operation from ?40°C to 85°C.特性Simultaneous Sampling of Two Single-Ended Signals or One Differential Signal Integrated 16-Word FIFO Signal-to-Noise and Distortion Ratio: 59 dB at fI = 2 MHz Differential Nonlinearity Error: ±1 LSB Integral Nonlinearity Error: ±1 LSB Auto-Scan Mode for Two Inputs 3-V or 5-V Digital Interface Compatible Low Power: 216 mW Max 5-V Analog Single Supply Operation Internal Voltage References ...50 PPM/°C and ±5% Accuracy Parallel uC/DSP Interface APPLICATIONS Radar Applications Communications Control Applications High-Speed DSP Front-End Automotive Applications
2025-05-06
THS4541 高速差動、IO、放大器技術手冊THS4541 是一款低功耗、電壓反饋、全差分放大器 (FDA),輸入共模范圍低于負軌和軌到軌輸出。THS4541 專為低功耗數據采集系統而設計,其中高密度對于高性能模數轉換器 (ADC) 或數模轉換器 (DAC) 接口設計至關重要。
2025-04-29
2025-04-27
THS4541-Q1 汽車類高速差分、IO放大器技術手冊THS4541-Q1 是一款低功耗、電壓反饋、完全差分放大器 (FDA),輸入共模范圍小于負電源軌和軌到軌輸出。其設計用于低功耗數據采集系統,其中高密度對于高性能 ADC 或 DAC 接口設計至關重要。
2025-04-27
2025-04-11
2025-04-11
2025-04-07
2025-03-21