尊敬的客戶:為給您持續提供一對一優質服務,即日起,元器件訂單實付商品金額<300元時,該筆訂單按2元/SKU加收服務費,感謝您的關注與支持!
THS10064
10 位 6MSPS ADC,具有四通道 (可配置)、DSP/uP IF、集成 16x FIFO、通道 自動掃描和低功耗
制造商:TI
產品信息
描述The THS10064 is a CMOS, low-power, 10-bit, 6 MSPS analog-to-digital converter (ADC). The speed, resolution, bandwidth, and single-supply operation are suited for applications in radar, imaging, high-speed acquisition, and communications. A multistage pipelined architecture with output error correction logic provides for no missing codes over the full operating temperature range. Internal control registers are used to program the ADC into the desired mode. The THS10064 consists of four analog inputs, which are sampled simultaneously. These inputs can be selected individually and configured to single-ended or differential inputs. An integrated 16 word deep FIFO allows the storage of data in order to improve data transfers to the processor. Internal reference voltages for the ADC (1.5 V and 3.5 V) are provided. An external reference can also be chosen to suit the dc accuracy and temperature drift requirements of the application. Two different conversion modes can be selected. In single conversion mode, a single and simultaneous conversion of up to four inputs can be initiated by using the single conversion start signal (CONVST)\. The conversion clock in single conversion mode is generated internally using a clock oscillator circuit. In continuous conversion mode, an external clock signal is applied to the CONV_CLK input of the THS10064. The internal clock oscillator is switched off in continuous conversion mode. The THS10064C is characterized for operation from 0°C to 70°C, and the THS10064I is characterized for operation from ?40°C to 85°C.特性High-Speed 6 MSPS ADC 4 Analog Inputs Simultaneous Sampling of 4 Single-Ended Signals or 2 Differential Signals or Combination of Both Differential Nonlinearity Error: ±1 LSB Integral Nonlinearity Error: ±1.5 LSB Signal-to-Noise and Distortion Ratio: 59 dB at fI = 2 MHz Auto-Scan Mode for 2, 3, or 4 Inputs 3-V or 5-V Digital Interface Compatible Low Power: 216 mW Max 5-V Analog Single Supply Operation Internal Voltage References ...50 PPM/°C and ±5% Accuracy Glueless DSP Interface Parallel μC/DSP Interface Integrated FIFO Available in TSSOP Package Pin Compatible With 12-Bit THS1206 APPLICATIONS Radar Applications Communications Control Applications High-Speed DSP Front-End Automotive Applications
2025-04-27
THS4541-Q1 汽車類高速差分、IO放大器技術手冊THS4541-Q1 是一款低功耗、電壓反饋、完全差分放大器 (FDA),輸入共模范圍小于負電源軌和軌到軌輸出。其設計用于低功耗數據采集系統,其中高密度對于高性能 ADC 或 DAC 接口設計至關重要。
2025-04-27
2025-05-06
THS4541 高速差動、IO、放大器技術手冊THS4541 是一款低功耗、電壓反饋、全差分放大器 (FDA),輸入共模范圍低于負軌和軌到軌輸出。THS4541 專為低功耗數據采集系統而設計,其中高密度對于高性能模數轉換器 (ADC) 或數模轉換器 (DAC) 接口設計至關重要。
2025-04-29
2025-05-18
2025-05-15
THS4522 極低功耗雙通道軌到軌輸出全差動放大器技術手冊THS4521、THS4522和THS4524系列器件是非常低功耗的全差分放大器,具有軌到軌輸出和包括負軌的輸入共模范圍。這些放大器專為功耗是關鍵參數的低功耗數據采集系統和高密度應用而設計,在音頻應用中提供卓越的性能。
2025-05-15
THS4521 極低功耗軌到軌輸出全差動放大器技術手冊THS4521、THS4522和THS4524系列器件是非常低功耗的全差分放大器,具有軌到軌輸出和包括負軌的輸入共模范圍。這些放大器專為功耗是關鍵參數的低功耗數據采集系統和高密度應用而設計,在音頻應用中提供卓越的性能。
2025-05-15