? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?

Key Features

  200 MHz/330 DMIPS, MIPS Warrior M-class core

  DSP-enhanced core:

  Four 64-bit accumulators

  Single-cycle MAC, saturating and fractional math

  IEEE 754-compliant

  Dual Panel Flash for live update support

  FPU for fast single- and double-precision math

  12-bit, 18 MSPS, 48-channel ADC module

  Memory Management Unit for optimum embedded OS execution

  microMIPS mode for up to 35% code compression

  CAN, UART, I2C, PMP, EBI, SQI & Analog Comparators

  SPI/I2S interfaces for audio processing and playback

  Hi-Speed USB 2.0 Device/Host/OTG

  10/100 Mbps Ethernet MAC with MII and RMII interface

  Crypto Engine with a RNG for data encryption/decryption and authentication (AES, 3DES, SHA, MD5, and HMAC)

  Temperature Range:?- 40°C to 85°C;?- 40°C to 125°C

  AEC-Q100 Qualified

  Grade 1

  - 40°C to 125°C

Microcontroller Features ? ? ? ? ? ? ? ? ? ? ? ? ??

  Operating voltage range of 2.2V to 3.6V

  2MB Flash memory (plus an additional 160 KB of Boot Flash)

  512KB SRAM memory

  microMIPS mode for up to 35% smaller code size

  DSP-enhanced core:

  Four 64-bit accumulators

  Single-cylce MAC, saturating and fractional math

  IEEE 754-compliant

  FPU for fast single- and double-precision math

  Code-efficient (C and Assembly) architecture

  Low-power management modes (Idle and Sleep)

Peripheral Features

  50 MHz External Bus Interface (EBI)

  50 MHz Serial Quad Interface (SQI)

  Peripheral Pin Select (PPS) functionality to enable function remap

  8 channels of hardware programmable DMA and 18 channels of dedicated DMA with automatic data size detection

  Six UART modules (25 Mbps): Supports LIN 1.2 and IrDA protocols

  Two CAN modules 2.0B Active with DeviceNet addressing support

  Six 4-wire SPI modules (50 Mbps)

  SQI configurable as an additional SPI module (50 MHz)

  Five I2C modules (up to 1 Mbaud) with SMBus support

  Parallel Master Port (PMP)

  Hardware Real-Time Clock and Calendar (RTCC)

  Nine 16-bit Timers/Counters (four 16-bit pairs combine to create four 32-bit timers)

  Nine Capture inputs and Nine Compare/PWM outputs

Audio/Graphics/Touch HMI Features

  Graphics interface: EBI or PMP

  Audio data communication: I2S, LJ, RJ, USB

  Audio data control interface: SPI and I2C?

  Audio data master clock: Fractional clock frequencies with USB synchronization

Advanced Analog Features

  12-bit ADC Module:

  18 Msps rate with six Sample and Hold (S&H) circuits (five dedicated and one shared)

  Up to 48 analog inputs

  Can operate during sleep and idle modes

  Multiple trigger sources

  Six digital comparators and six digital filters

  Two analog comparators with 32 programmable voltage references

  Temperature sensor with ±2°C accuracy

Debugger Development Support

  In-circuit and in-application programming

  4-wire MIPS? Enhanced JTAG interface

  Unlimited program and 12 complex data breakpoints

  IEEE 1149.2-compatible (JTAG) boundary scan

  Non-intrusive hardware-based instruction trace

Integrated Software Libraries and Tools

  MPLAB Harmony - PIC32 software development framework

  C/C++ compiler with native DSP/fractional and FPU support

  TCP/IP, USB, Graphics and mTouch middleware

  MFi, Android and Bluetooth audio frameworks

  RTOS Kernels, Express Logic ThreadX, FreeRTOS, OPENRTOS, Micriμm,?μC/OS and SEGGER embOS