
Ideal for 3V applications that are cost senstitive, requiring flexible serial communication with four serial ports: double synchronous serial ports (I2C? and SPI?) and double asynchronous serial ports. Large amounts of Flash program memory make it ideal for instrumentation panels, TCP/IP enabled embedded applications as well as metering, industrial control and monitoring applications. The PIC18F86J16 is an enhancement to the PIC18F86J15 family, including an internal 8MHz oscillator, lower power and improved EEPROM emulation via word Flash write capabilities.
48 MHz and 12 MIPS at 3V
Flash 10,000 endurance, 20 years retention
2.0 - 3.6V voltage range
5V tolerant digital inputs
Enhanced ICD with 3 HW breakpoints
Internal 8MHz oscillator
nanoWatt technology
Parallel Master Port (PMP)
PIC18F86J16 封裝圖
型號 | 制造商 | 描述 | 購買 |
---|---|---|---|
PIC18F86J16-I/PT | 3M | THERMALLYCONDUCTIVEGREASE10 | 立即購買 |
PIC18F86J16T-I/PT | ATS | HEATSINK60X40X9.5MMXCUTT766 | 立即購買 |
在無線圖像傳輸通信系統中,要獲得較高的接收增益,需要定向接收天線對準信號發射源。本文針對由指揮車和被控車輛組成的應用平臺,利用磁羅盤和GPS的定向、定位技術設計了車載定向天線云臺隨動系統。在該系統中,定向...
Microchip的PIC18F8585 MCU,這是一款帶CAN接口的MCU。
嵌入式系統是指以應用為中心,以計算機技術為基礎,軟、硬件可裁剪,適應應用系統對功能、體積、成本、可靠性、功耗嚴格要求的專用計算機系統。嵌入式系統是面向應用的,系統的硬件選型和軟件開發模式都必須根據具體...
基于PIC18F2580的CAN總線超聲波測距智能節點設計 1? 引言 移動機器人要實現在不確定環境下運行,必須具備自動導航和避障功能。在移動機器人的導航系統
漏電繼電器的CPU中采用了PIC18F6585芯片,漏電信號的檢測由零序電流互感器來完成,它可將檢測到的被保護線路的漏電電流轉換成毫伏級的交流電壓信號,再通過信號整流、放大和濾波得到一個直流電壓,配合相應的控制電路來...
采用pic18f458單片機作為控制器,通過其增強型的PWM脈寬調制模塊ECCP控制助力電機,實現eps系統的助力控制、回正控制、阻尼控制等方式。
讀寫PIC18F452內部EEPROM的實例源程序 list p=18f452 #i nclude <P18F452.INC>; ;---- 18F452 RAM LOCATIONS ------
本文利用GPS所提供的精確授時功能,采用單片機技術,實現了一種GPS時鐘,并將時間信息通過LCD進行顯示