
For product comparison, please consider:
The KSZ9567 is a fully integrated layer 2, managed,seven-port gigabit Ethernet switch with numerousadvanced features. Five of the seven ports incorporate10/100/1000 Mbps PHYs. The other two ports haveinterfaces that can be configured as SGMII, RGMII, MII or RMII.Either of these may connect directly to a host processor orto an external PHY. ?The SGMII port may interface to a fiber optic transceiver.
Full register access is available by SPI or I2C interfaces,and by optional in-band management via any of the data ports.PHY register access is provided by a MIIM interface.
Security features include support for IEEE 802.1X port-based authentication and Access Control List (ACL) filtering.
As a member of the EtherSynch? product family, theKSZ9567 incorporates full hardware support for the IEEE1588v2 Precision Time Protocol (PTP), including hardwaretime-stamping at all PHY-MAC interfaces, and a high-resolution hardware “PTP clock”. IEEE 1588 provides sub-microsecond synchronization for a range of industrialEthernet applications.
The KSZ9567 fully supports the IEEE family of audiovideo bridging (AVB) standards, which provide for highquality of service (QoS) for latency sensitive traffic streamsover Ethernet. Time-stamping and time-keeping featuressupport IEEE 802.1AS time synchronization. All portsfeature credit based traffic shapers for IEEE 802.1Qav,and a time aware scheduler as proposed for IEEE802.1Qbv.?
An assortment of power-management features includingEnergy-Efficient Ethernet (EEE) have been designed in tosatisfy energy efficient environments.
Microchip's complimentary and confidential LANCheck? online design review service is available for customers who have selected our products for their application design-in.?The? is subject to?Microchip's??and requires a myMicrochip?account.
Non-blocking wire-speed Ethernet switching fabric
Advanced Switch Capabilities
IEEE802.1AS (AVB) time synchronization support
IEEE802.1Qav (AVB) credit based traffic shaper
Time aware traffic scheduler with low latency cut- through mode
IEEE1588v2 Precision Time Protocol support
Time-stamping on all ports
Precision GPIO pin timed to the AVB/1588 clock?
Full-featured forwarding and filtering control, including Access Control List (ACL) filtering
IEEE802.1X support (Port-Based Network Access Control)
IEEE802.1Q VLAN supportfor 128 active VLAN groups and the full range of 4096 VLAN IDs
IEEE802.1p/Q tag insertion or removal on a per port basis and support for double-tagging
VLAN ID tag/untag options on per port basis
IEEE802.3x full-duplex flow control and half-duplex back pressure collision control
IGMPv1/v2/v3 snooping for multicast packet filtering
IPv6 multicast listener discovery (MLD) snooping
QoS/CoS packets prioritization support: 802.1p, DiffServ-based and re-mapping of 802.1p priority field per-port basis on four priority levels
IPv4/IPv6 QoS support
Programmable rate limiting at ingress and egress ports
Broadcast storm protection
Four priority queues with dynamic packet mapping for IEEE802.1p, IPv4 DIFFSERV, IPv6 TrafficClass
MAC filtering function to filter or forward unknown unicast, multicast and VLAN packets
Self-address filtering for implementing ring topologies?
Comprehensive Configuration Register AccessHigh-speed SPI (4-wire, up to 50MHz) interface to access all internal registers
I2C Interface to access all registers
MII management (MIIM, MDC/MDIO 2 wire) interface to access all PHY registers per IEEE 802.3 specification
In-band management to access all registers via any of the seven ports, strap enabled
I/O pin strapping facility to set certain register bits from I/O pins at reset time?
Control registers configurable on-the-fly
Switch Monitoring FeaturesPort mirroring/monitoring/sniffing: ingress and/or egress traffic to any port or MII/RMII
MIB counters for fully-compliant statistics gathering (34 MIB counters per port)
Low Power DissipationFull-chip software power-down
Energy detect power-down (EDPD)
Support IEEE P802.3az Energy Efficient Ethernet (EEE)
Wake on LAN (WoL) support
KSZ9567 封裝圖
KSZ9567 封裝圖
型號 | 制造商 | 描述 | 購買 |
---|---|---|---|
KSZ9567RTXI | Essentra | HEX SOCKET CAP SCREW, #10-24 THR | 立即購買 |
4月26日,交通運輸部黨組書記、部長李小鵬在部務會上強調,要高度重視公路橋梁隧道結構監測工作,抓緊推進公路橋梁隧道結構監測系統建設,進一步健全完善公路橋梁隧道結構監測長效運行機制。 中海達積極參與公路橋梁隧道結構監測工作。近年來,中海達橋隧坡安全監測預警解決方案已在云南、四川、西藏、廣西、重慶、山東、遼寧等省份及自治區的市政口和公路口的橋梁、隧道和邊坡領域成功應用,覆蓋橋梁120余座,邊坡60余座,隧道10余座,
本方案旨在為各類傳感器(包括壓力傳感器、位移傳感器、速度傳感器、傾角傳感器等)提供一套完整的自動化測試解決方案。方案通過整合測試臺、數據采集系統與軟件控制平臺,可對多種傳感器進行高效精準的測試,確保其性能滿足相關使用標準。
在DARWIN系列中,MAX32660是一款超低功耗、成本高效、高集成度32位微控制器,專為電池供電的設備和無線傳感器而設計。它將靈活的多功能電源管理單元與功能強大、搭載浮點單元(FPU)的Arm^?^ Cortex ^?^ -M4處理器組合使用,采用小尺寸封裝:1.6mm x 1.6mm、16引腳WLP或4mm x 4mm、20引腳TQFN-EP或3mm x 3mm、24引腳TQFN-EP封裝。
2023年7月20日,賽思子公司西克魔邇攜“推動工業科技全行業飛速發展的基石——國產化時鐘SOC芯片”項目在第六屆“創業北京”創業創新大賽暨石景山區第四屆創業創新大賽中榮獲一等獎。 ? “創業北京 創贏未來”。7月20日,第六屆“創業北京”創業創新大賽暨石景山區第四屆創業創新大賽落下精彩帷幕。賽思子公司西克魔邇在歷經近三個月、128個項目的激烈角逐,攜其“推動工業科技全行業飛速發展的基石——國產化時鐘SOC芯片”項目在決賽中脫穎
中國 IC 獨角獸聯盟近期正式揭曉 "中國半導體行業高質量發展創新成果征集" 活動獲評榜單,涵蓋領軍人物、領軍企業、優秀解決方案/產品三大類別,全面展現國內集成電路全產業鏈的創新實力與發展成果。奇異摩爾創始人兼 CEO 田陌晨憑借在AI網絡互聯領域的創新成就,榮膺 “領軍人物獎”。
在電力系統中,恒壓發電機作為一種能夠提供穩定輸出電壓的設備,廣泛應用于各種需要穩定電力供應的場合。然而,為了確保發電機在不同負載條件下都能保持輸出電壓的穩定,加裝調節器顯得尤為重要。本文旨在深入探討恒壓發電機加裝調節器的技術要點,以期為相關領域的從業者提供有價值的參考。
柔性制造系統是一種高度靈活的生產系統,具有以下幾個特點: 1. 高度靈活性:柔性制造系統具有極高的靈活性,可以根據市場的需求進行快速調整,生產多樣化的產品。系統可以實現自適應生產,根據不同顧客的需求快速更改生產計劃和生產參數。 2. 高度智能化:柔性制造系統采用數字化技術并具有高度自動化的生產流程。自動化生產線可以根據來自傳感器和傳達器的生產數據自動調整生產參數,自適應生產環境的變化以及實現生產自我優化和智能決策。
功率放大器的基本要求包括:輸入信號的頻率范圍、輸入信號的電平、輸出功率、輸入阻抗、噪聲抑制、穩定性、功耗、體積等。
KA7553A | KA278RA05C | K3010PGSeries | KAF-0402 |
KA7805AE | KAI-0330 | KA7905 | KST10 |
KAI-04070 | KSZ8695 | KA378R33 | KA331 |
KDT00030 | KA3843B | KA7915 | KSH122 |
KAI-08051 | KA2807 | KA7805E | KA3844B |